To order and for more information call 717.645.4358
AMSOIL is the best synthetic oil on the market!! Due to
growing popularity and need, AMSOIL is looking for individuals interested
in a part or full time dealership that can even be run as a home-based
business.
This is not a get Rich Quick Scheme as it requires time
and effort on your part.
Be a part of a multi-billion dollar industry and become
a dealer today!
FREE CATALOG
www.raceshopper.com
www.changing-gears.com
www.autoseatcover.biz
|
|
|
|
Synthetic TBI
ISO 32/46 Biodegradable Hydraulic Oil (TBI)
- Denison HF-0,
HF-1, HF-2
- Vickers M-2950-S,
I-286-S
- Cincinnati Milacron
P-68, P-70
See
Pricing Information or Place an
Order
Package sizes
include:
5-Gallon Pail 55-Gallon
Drum | |
PRODUCT DESCRIPTION AMSOIL TBI hydraulic oil is a premium
lubricant designed to biodegrade to its natural
state when subjected to sunlight, water and
microbial activity. Because it is formulated with
ashless additives that do not contain heavy
metals, TBI has a very low toxicity
level.
AMSOIL TBI
incorporates very high-quality synthetic base oils
that provide thermal stability, even though they
are biodegradable. TBI also contains antiwear
additives that have been thoroughly tested and
qualified against stringent hydraulic oil
standards including Denison HF-0, HF-1 and HF-2,
Vickers M-2950-S and I-286-S and Cincinnati
Milacron P-68 and P-70. TBI provides optimum
protection for hydraulics, preventing pump wear
and rusting of critical components. It also
contains antioxidants that increase oil life and
foam inhibitors that quickly release air from the
oil.
Based on
high-quality, synthetic oil chemistry that better
withstands heat and lasts longer, TBI outperforms
vegetable oil-type, biodegradable hydraulic oils,
ensuring problem-free operation.
APPLICATION
RECOMMENDATION AMSOIL TBI is recommended
for gear, vane and piston stationary and mobile
hydraulic systems. TBI is a multi-viscosity, SAE
5W-20 oil and is recommended for use in place of
either ISO-32 or ISO-46 hydraulic oils.
TBI is
essentially compatible with typical hydraulic
oils, and small amounts of contamination (lines,
residue) are acceptable. However, it is
recommended systems be drained prior to installing
TBI. Excessive system contamination will minimize
its biodegradability effectiveness.
TBI is especially
well suited for applications where environmental
contamination due to leaking or blown hydraulic
lines presents an environmental hazard.
TBI has been
tested and found compatible with Nitrile (Buna-N),
Poly Acrylate, Fluorocarbon (Viton) and Silicone
seals which are commonly found in hydraulic
systems.
The ability of
TBI to extend drain intervals and excel in
performance is subject to operating conditions and
maintenance practices. Monitoring by oil analysis
is recommended.
PERFORMANCE
FEATURES
- 80% Biodegradable Within 21
days (CEC L-33-A-94)
- Thermally Stable
- Resists Oxidation
- Anti-Rust and Anti-Foam
- -69°F Pour Point For Cold
Temperature Performance
- Outperforms Vegetable Type
Bio-Hydraulic Oils
AMSOIL PRODUCT
WARRANTY AMSOIL
Industrial Lubricants are formulated to exceed
accepted industry specifications. AMSOIL warrants
that the use of its lubricants will not cause
mechanical damage to any mechanically sound
equipment when AMSOIL products are used in full
compliance with the company’s
recommendations.
However, the purchaser is
responsible for determining if these
specifications are adequate and proper for the
intended application. The AMSOIL warranty is
limited to lubricant performance consistent with
indicated specifications. No additional warranty,
expressed or implied, can be made.
AMSOIL PRODUCT
AVAILABILITY AMSOIL
products are available in 5-gallon pails,
55-gallon drums, 275-gallon totes and bulk
quantities.
AMSOIL Industrial Lubricants are
stocked in Superior, Wisconsin and in select
regional distribution centers throughout the
United States and Canada. AMSOIL will stock
additional quantities of lubricants or special
order products based on customer requests and
regional demands. For applications and
recommendations, contact your local AMSOIL
industrial sales representative or AMSOIL
INC.
Typical Technical
Properties |
Synthetic TBI ISO 32/46
Biodegradable Hydraulic Oil |
TBI |
ISO VG - ASTM
D-2422 |
32/46 |
SAE Grade |
5W-20 |
Viscometrics 100°C, cSt - ASTM
D-445 |
7.3 |
Viscometrics 40°C, cSt - ASTM
D-445 |
40.1 |
Viscosity Index (VI) - ASTM
D-2270 |
149 |
Specific Gravity - ASTM
D-1298 |
0.9646 |
Density - ASTM
D-1298 |
8.033 |
Four-Ball Wear Test - ASTM
D-4172 (40 kg, 1200 rpm, 75° C, 60
min.) |
0.40 |
Flash Point °C (°F) - ASTM
D-92 |
256°C
(493°F) |
Fire Point °C (°F) - ASTM
D-92 |
282°C
(540°F) |
Pour Point °C (°F) - ASTM
D-97 |
-56°C
(-69°F) |
Copper Strip Corrosion Test -
ASTM D-130 |
1A |
Foam - ASTM D892 |
|
Sequence I |
0/0 |
Sequence II |
0/0 |
Sequence III |
0/0 |
Demulsibility - ASTM D1401
Oil/Water/Cuff (minutes) |
40/40/0
(15) |
Dielectric Strength, KV - ASTM
D-887 |
36KV |
Biodegradability % - CEC
L-32-A-94 |
80 | | |
|
|
[ HOME]
[ AUTO PARTS STORE ]
[ MOTOR OILS ]
[ GEAR LUBE ]
[ TRANSMISION FLUID ]
[ 2-CYCLE OIL ]
[ GREASES ]
[ OIL FILTERS ]
[ AIR FILTERS ]
[ HYDRAULIC ]
[ COMPRESSOR OIL ]
[ FUEL ADDITIVES ]
[ CAR CARE ]
[ FREE CATALOG ]
[ DONALSON FILTERS ]
[ MOTHRES- POLISHES WAXES CLEANERS ]
[ RACING ]
[ WARRANTY ]
[ ORDER ]
|
For more infomation call 717-645-4358
|
Testimonials
|
Peter Virgona of Merrick, NY is a self-proclaimed oil enthusiast.
“I do a great deal of reading and research, always looking for the best oil,”
Virgona said. “The more I read the more I realized AMSOIL was the best ‘true’
synthetic I could buy. After using Mobil 1 since 1986, I made the switch to
AMSOIL.”
Virgona drives a 1999 Ford Crown Victoria with nearly 98,000 miles on the engine.
He switched from Mobil 1 to AMSOIL 5W-30 Synthetic Motor Oil.
“The difference was immediate and signifi - cant,” Virgona said. “The idle
became much smoother. There are times I can’t tell if the car is running. It
also became much more responsive to the gas pedal, so much more responsive my
wife asked me what I did to the car.”
He has owned the car for almost nine years. “Not surprisingly, the gas mileage
improved signifi cantly,” he said. “This car always averaged 15 mpg going back
and forth from work. It now averages 16.5 mpg. That’s a 10 percent increase.
I truly didn’t expect such a big change.”
He waited to report his fi ndings until after he had driven the car at least
5,000 miles “to confi rm that the numbers are average and not just a fl uke.”
Virgona also installed AMSOIL 5W-30 in his sister-in-law’s 1996 Dodge Caravan
with a 3.0 litre V6 engine. She had always used conventional motor oil with
regular oil changes every 3,000 miles, Virgona said.
“Nonetheless, she had a signifi cant amount of sludge that was obvious under
the oil cap,” he said. “She also experienced a very loud lifter noise that would
come and go with the engine either hot or cold. Presumably the sludge was affecting
the oil circulation to the lifters.”
Oil consumption in the van was increasing, using about one quart every 1,500
to 2,000 miles.
“I switched her to AMSOIL and put in a new fi lter,” Virgona said. “Within
1,000 miles the lifter noise was all but gone. By 3,000 miles, virtually all
the sludge was gone. I drained and refi lled the oil a second time with AMSOIL
5W-30. The oil consumption is now down to one quart every 3,000 miles, with
no more lifter noise. And, except for a little yellow varnish, all the sludge
is gone.
“I am very happy with AMSOIL and plan to use it from now on. I recommend it
to anyone who wants a great synthetic oil.”
Virgona just had a case shipped to his father-in-law in Florida because he
believes in AMSOIL products, he said, and wants others to experience their benefi
ts. In fact, he’s considering becoming a Dealer. The more I read the more I
realized AMSOIL was the best ‘true’ synthetic I could buy.
|
|
|
|
AMSOIL
Preferred Customer
The AMSOIL Preferred Customer Program benefits anyone who is interested
in purchasing, or has been purchasing $75-$100 of automotive parts/products or more
per year. Learn all the details on how you
can buy AMSOIL lubricants at wholesale prices.
AMSOIL Preferred Customers are able to buy AMSOIL, Donaldson, NGK,
Wix, Trico, Mothers and Twin Air products at wholesale prices. Become
a Preferred Customer today! |
NEWS |
AMSOIL Product
Catalog
Download the AMSOIL product catalog
Become an AMSOIL Preferred Customer today and save 25%-35% on all
your AMSOIL purchased |
NEWS |
Better Fuel Mileage
Better Fuel Economy
Fuel economy is becoming more important with each passing year. Gas and diesel prices keep rising, putting a major strain on businesses that rely on vehicles and heavy equipment in their daily operations. AMSOIL synthetic lubricants improve fuel economy by allowing moving parts to move more freely, using less energy and creating less friction than when conventional lubricants are used.
The use of AMSOIL synthetic motor oil, gear lubes and transmission fluids can have a profound impact on fuel economy. Industry tests demonstrate an average conservative decrease in fuel consumption by two to five percent by switching to synthetic lubricants. Many AMSOIL customers report even larger gains in fuel economy.
|
NEWS |
7.3L PowerStroke Air Induction System
AMSOIL now carries a retrofit air induction system kit for Ford truck owners
who operate their vehicles in dirty or dusty conditions. Biggest benefits include:
* Improved fuel economy
* Increased horsepower
* Greater filtering efficiency
* Greater filter capacity
Designed for Ford 250-550 pickup trucks built after January 1998 thru to the
2003 model year, this kit has great selling potential. More than one million
Ford 7.3L PowerStroke Diesel pickup trucks are on the road today! |
NEWS |
AMSOIL
Torque-Drive™
AMSOIL Torque-Drive™ is recommended as a direct replacement for
TranSynd® Synthetic ATF in heavy duty, on and off highway automatic
transmissions manufactured by Allison®, General Motors®, Ford®,
Voith® and ZF® or wherever the standards TES-295, C-4, Dexron® III,
Mercon® or TE-ML 14C are specified.
|
NEWS |
API
Comparative Motor Oil Testing
AMSOIL Synthetic 10W-30 Motor Oil (ATM) and 10 competing conventional
and synthetic 10W-30 motor oils were subjected to a series of API
motor oil tests.
Read
all about it (174kb PDF) |
NEWS |
AMSOIL Interceptor High
Performance Synthetic 2-Cycle Oil Eliminates hard carbon
deposits
Extends engine life
Reduces smoke Prevents plug fouling
Read
all about it |
NEWS |
Nothing is better
than Mobil 1 ........ WRONG!
AMSOIL outperforms Mobil 1!
Read all about
it |
NEWS |
Reduce Americas dependence on foreign oil!
AMSOIL synthetic motor oils are designed for extended drain intervals
and reduce the amount of oil used by as much as 80%. Fewer oil changes
means less oil used. Better fuel economy means less oil being imported. |
|