To order and for more information call 717.645.4358
AMSOIL is the best synthetic oil on the market!! Due to
growing popularity and need, AMSOIL is looking for individuals interested
in a part or full time dealership that can even be run as a home-based
business.
This is not a get Rich Quick Scheme as it requires time
and effort on your part.
Be a part of a multi-billion dollar industry and become
a dealer today!
FREE CATALOG
www.raceshopper.com
www.changing-gears.com
www.autoseatcover.biz
|
|
|
|
PC Series Synthetic Compressor Oils
The
correct manufacturer-recommended viscosity grade
of AMSOIL PC Series compressor oil is
recommended for use in rotary screw, rotary
vane, reciprocating and other compressor
applications. Compatible with PAO-, ester- and
petroleum-based compressor oils. They are not
compatible with glycol- or silicone-based
compressor oils. Consult
AMSOIL for further information.
See
Pricing Information or Place an
Order
Package sizes
include:
| |
Compressor
Oil Cross Reference Guide (68k
PDF)
PRODUCT
DESCRIPTION AMSOIL PC Series Synthetic
Compressor Oils are long-life, premium compressor
lubricants based on novel, proprietary technology.
They incorporate the highest quality,
thermally-stable PAO synthetics fortified with
premium non-detergent, ashless additives for
maximum protection at high temperatures and
pressures. They last up to eight times longer than
petroleum oils, effectively reducing maintenance
and waste oil disposal costs.
Improves Compressor
Efficiency AMSOIL PC Synthetic
Compressor Oils have low friction properties and
they resist viscosity increase from oxidation.
They help improve operating efficiency and save
money on electrical energy consumption.
Controls Foam and Reduces
Wear AMSOIL PC Compressor Oils contain
anti-foam additives and, unlike other compressor
oils, they are anti-wear fortified. Good foam
control reduces heat, oxidation and wear. High
contact regions are protected against wear for
increased compressor life and efficiency.
Resists Water
Contamination Water from condensation
builds up in compressors that can cause unwanted
oil/water emulsions, environmental discharge
hazards and rust. AMSOIL PC Synthetic Compressor
Oils are hydrolytically stable. They resist acid
formation, readily separate from water and are
anti-rust fortified. Water can be easily drained
off for simplified environmental discharge and
increased oil life.
Resists Heat and
Oxidation AMSOIL PC Series Compressor
Oils combine the inherent stability of premium
synthetic base oils with specialized anti-oxidant
additives to resist varnish, carbon and acid
formation. They protect compressors better and
last longer in service than petroleum oils,
especially during hot operating conditions.
Safety
Advantage AMSOIL PC Series Synthetic
Compressor Oils are ashless, high flash point
formulations with very low carbonforming
tendencies that minimize the incidence of
ignition-promoting “hot spots.” While PC Synthetic
Compressor Oils can provide improved fire safety,
they cannot be considered non-flammable.
APPLICATION
RECOMMENDATION The appropriate
viscosity of AMSOIL PC Series Synthetic Compressor
Oil is recommended for use in single and
multistage rotary screw, vane, centrifugal and
reciprocating compressor crankcase and cylinders,
vacuum pumps and other applications such as gears,
bearings, blowers, pumps and handheld pneumatic
tools. In compressor applications, drain intervals
of 8,000 hours or more can be expected under
normal operation. Drain intervals are subject to
operating conditions and maintenance practices.
Monitoring by oil analysis is recommended. For
best performance, AMSOIL recommends the compressor
be drained prior to the installation of PC
Synthetic Compressor Oil. If carbon deposits are
present on the internal components, it is
recommended they be removed following the
compressor manufacturer recommendations.
COMPATIBILITY
Gases: |
• Nitrogen •
Hydrogen • Helium • Carbon Monoxide • Carbon
Dioxide (dry) • Ethylene • Methane •
Propane • Butane • Propylene • Butylenes •
Natural Gas • Benzene • Butadiene • Furnace
(crack gas) • Hydrogen Sulfide (dry) •
Synthetic Gas • Sulfur Dioxide. |
Paints: |
•
Epoxy • Oil Resistant Alkyd • Acrylic
Enamel. |
Plastics: |
• Acetal (Delrin) •
ABS • Phenolic • Polyamide-imide • Polyamide
(Nylon) • Polycarbonate (metal covered
only) • Polyester • Polyetherimide (Nylon) •
Polyimide • Polyphenylene oxide • Polystyrene
• Polysulfone • PTFE (Teflon) •
Terephthalate. |
Elastomers: |
• Fluoroelastomer
(Viton) • Nitrile (Buna N) • Polyacrylate •
TFE/P • Poly Urethane. |
Note: Not
recommended for “breathing air” or refrigeration
compressors. Not recommended for use with
polycarbonate plastic that is not metal covered,
PVC plastic and butyl, ethylene-propylene or SBR
rubber. PC Series Oils are Not Compatible with
polyalkylene glycol or silicone
oils. |
HEALTH & SAFETY This
product is not expected to cause health concerns
when used for the intended application and
according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available
upon request at 715-392-7101 or on
the AMSOIL Website. Keep
Out of Reach of Children. Don't pollute.
Return used oil to collection centers.
Typical Technical
Properties
Synthetic PC
Series Compressor Oils |
PCH ISO
32 SAE 10W |
PCI ISO
46 SAE 20 |
PCJ ISO
68 SAE 30 |
PCK ISO
100 SAE 40 |
PCL ISO
150 SAE 50 |
ISO VG -
ASTM D-2422 |
32 |
46 |
68 |
100 |
150 |
VK 100°C -
ASTM D-445 |
6.2 |
7.6 |
10.3 |
13.6 |
17.9 |
VK 40°C -
ASTM D-445 |
33.1 |
43.7 |
67.8 |
100.5 |
148.4 |
Viscosity
Index - ASTM D-2270 |
137 |
142 |
138 |
136 |
134 |
SPGR - ASTM
D-1298 |
0.8393 |
0.8418 |
0.8565 |
0.8550 |
0.8602 |
Density -
ASTM D-1298 |
7.989 |
7.009 |
7.081 |
7.119 |
7.163 |
Flash Point
°C (°F) - ASTM D-92 |
264
(507) |
257 (495) |
258 (496) |
264 (507) |
254 (489) |
Fire Point
°C (°F) - ASTM D-92 |
278
(532) |
272 (522) |
274 (525) |
276 (529) |
274 (525) |
Pour Point
°C (°F) - ASTM D-97 |
-53
(-63) |
-50 (-58) |
-48 (-54) |
-45 (-49) |
-42 (-44) |
Four-Ball
Wear Test - ASTM D-4172 (40 kg, 1200 rpm, 75° C,
60 min.) |
0.45 |
0.45 |
0.45 |
0.45 |
0.45 |
Copper Strip
Corrosion Test - ASTM D-130 |
1A |
1A |
1A |
1A |
1A |
Rust Test -
ASTM D665 A & B Fresh Water and Synthetic
Sea Water |
Pass |
Pass |
Pass |
Pass |
Pass |
Foam, ml
(ASTM D-892) Sequence I, II, III Test End - and
After 10 minutes settling |
0/0/0 |
0/0/0 |
0/0/0 |
0/0/0 |
0/0/0 |
Demulsibility ASTM D-1401
[oil/water/cuff (minutes)] |
40/40/0
(5) |
40/40/0 (5) |
40/40/0 (5) |
40/40/0 (5) |
40/40/0
(5) | | |
|
|
[ HOME]
[ AUTO PARTS STORE ]
[ MOTOR OILS ]
[ GEAR LUBE ]
[ TRANSMISION FLUID ]
[ 2-CYCLE OIL ]
[ GREASES ]
[ OIL FILTERS ]
[ AIR FILTERS ]
[ HYDRAULIC ]
[ COMPRESSOR OIL ]
[ FUEL ADDITIVES ]
[ CAR CARE ]
[ FREE CATALOG ]
[ DONALSON FILTERS ]
[ MOTHRES- POLISHES WAXES CLEANERS ]
[ RACING ]
[ WARRANTY ]
[ ORDER ]
|
For more infomation call 717-645-4358
|
Testimonials
|
Peter Virgona of Merrick, NY is a self-proclaimed oil enthusiast.
“I do a great deal of reading and research, always looking for the best oil,”
Virgona said. “The more I read the more I realized AMSOIL was the best ‘true’
synthetic I could buy. After using Mobil 1 since 1986, I made the switch to
AMSOIL.”
Virgona drives a 1999 Ford Crown Victoria with nearly 98,000 miles on the engine.
He switched from Mobil 1 to AMSOIL 5W-30 Synthetic Motor Oil.
“The difference was immediate and signifi - cant,” Virgona said. “The idle
became much smoother. There are times I can’t tell if the car is running. It
also became much more responsive to the gas pedal, so much more responsive my
wife asked me what I did to the car.”
He has owned the car for almost nine years. “Not surprisingly, the gas mileage
improved signifi cantly,” he said. “This car always averaged 15 mpg going back
and forth from work. It now averages 16.5 mpg. That’s a 10 percent increase.
I truly didn’t expect such a big change.”
He waited to report his fi ndings until after he had driven the car at least
5,000 miles “to confi rm that the numbers are average and not just a fl uke.”
Virgona also installed AMSOIL 5W-30 in his sister-in-law’s 1996 Dodge Caravan
with a 3.0 litre V6 engine. She had always used conventional motor oil with
regular oil changes every 3,000 miles, Virgona said.
“Nonetheless, she had a signifi cant amount of sludge that was obvious under
the oil cap,” he said. “She also experienced a very loud lifter noise that would
come and go with the engine either hot or cold. Presumably the sludge was affecting
the oil circulation to the lifters.”
Oil consumption in the van was increasing, using about one quart every 1,500
to 2,000 miles.
“I switched her to AMSOIL and put in a new fi lter,” Virgona said. “Within
1,000 miles the lifter noise was all but gone. By 3,000 miles, virtually all
the sludge was gone. I drained and refi lled the oil a second time with AMSOIL
5W-30. The oil consumption is now down to one quart every 3,000 miles, with
no more lifter noise. And, except for a little yellow varnish, all the sludge
is gone.
“I am very happy with AMSOIL and plan to use it from now on. I recommend it
to anyone who wants a great synthetic oil.”
Virgona just had a case shipped to his father-in-law in Florida because he
believes in AMSOIL products, he said, and wants others to experience their benefi
ts. In fact, he’s considering becoming a Dealer. The more I read the more I
realized AMSOIL was the best ‘true’ synthetic I could buy.
|
|
|
|
AMSOIL
Preferred Customer
The AMSOIL Preferred Customer Program benefits anyone who is interested
in purchasing, or has been purchasing $75-$100 of automotive parts/products or more
per year. Learn all the details on how you
can buy AMSOIL lubricants at wholesale prices.
AMSOIL Preferred Customers are able to buy AMSOIL, Donaldson, NGK,
Wix, Trico, Mothers and Twin Air products at wholesale prices. Become
a Preferred Customer today! |
NEWS |
AMSOIL Product
Catalog
Download the AMSOIL product catalog
Become an AMSOIL Preferred Customer today and save 25%-35% on all
your AMSOIL purchased |
NEWS |
Better Fuel Mileage
Better Fuel Economy
Fuel economy is becoming more important with each passing year. Gas and diesel prices keep rising, putting a major strain on businesses that rely on vehicles and heavy equipment in their daily operations. AMSOIL synthetic lubricants improve fuel economy by allowing moving parts to move more freely, using less energy and creating less friction than when conventional lubricants are used.
The use of AMSOIL synthetic motor oil, gear lubes and transmission fluids can have a profound impact on fuel economy. Industry tests demonstrate an average conservative decrease in fuel consumption by two to five percent by switching to synthetic lubricants. Many AMSOIL customers report even larger gains in fuel economy.
|
NEWS |
7.3L PowerStroke Air Induction System
AMSOIL now carries a retrofit air induction system kit for Ford truck owners
who operate their vehicles in dirty or dusty conditions. Biggest benefits include:
* Improved fuel economy
* Increased horsepower
* Greater filtering efficiency
* Greater filter capacity
Designed for Ford 250-550 pickup trucks built after January 1998 thru to the
2003 model year, this kit has great selling potential. More than one million
Ford 7.3L PowerStroke Diesel pickup trucks are on the road today! |
NEWS |
AMSOIL
Torque-Drive™
AMSOIL Torque-Drive™ is recommended as a direct replacement for
TranSynd® Synthetic ATF in heavy duty, on and off highway automatic
transmissions manufactured by Allison®, General Motors®, Ford®,
Voith® and ZF® or wherever the standards TES-295, C-4, Dexron® III,
Mercon® or TE-ML 14C are specified.
|
NEWS |
API
Comparative Motor Oil Testing
AMSOIL Synthetic 10W-30 Motor Oil (ATM) and 10 competing conventional
and synthetic 10W-30 motor oils were subjected to a series of API
motor oil tests.
Read
all about it (174kb PDF) |
NEWS |
AMSOIL Interceptor High
Performance Synthetic 2-Cycle Oil Eliminates hard carbon
deposits
Extends engine life
Reduces smoke Prevents plug fouling
Read
all about it |
NEWS |
Nothing is better
than Mobil 1 ........ WRONG!
AMSOIL outperforms Mobil 1!
Read all about
it |
NEWS |
Reduce Americas dependence on foreign oil!
AMSOIL synthetic motor oils are designed for extended drain intervals
and reduce the amount of oil used by as much as 80%. Fewer oil changes
means less oil used. Better fuel economy means less oil being imported. |
|