|
Series 3000
Synthetic 5W-30 Heavy-Duty Diesel Oil (HDD)
See
Pricing Information or Place an
Order
Package sizes
include:
1-Quart Bottle 1-Quart
Bottles (case of 12) 1-Gallon
Bottle 1-Gallon Bottles (case of
4) 2.5-Gallon Bottle 2.5-Gallon Bottles
(case of 2) 30-Gallon Drum 55-Gallon
Drum
|
PRODUCT
DESCRIPTION AMSOIL Series 3000
100% Synthetic 5W-30 Diesel Oil (HDD) delivers
extraordinary lubrication in both diesel and
gasoline engines found in commercial, fleet and
personal vehicles. By combining the industry’s
premier synthetic technology with AMSOIL premium
additives, AMSOIL HDD exceeds the higher
performance demands of modern engines. It
withstands the stress of higher heat, higher acid
levels and excessive soot loading found in EGR
equipped engines. AMSOIL Series 3000 Synthetic
5W-30 Diesel Oil consistently outperforms
conventional and synthetic diesel oils for
long-lasting performance and
protection.
AMSOIL, the leader in automotive
synthetic lubrication, produced the world’s first
API qualified synthetic motor oil in 1972. Trust
the extensive experience of AMSOIL The First in
Synthetics® to do the best job protecting your
engine.
Extends Drain
Intervals AMSOIL HDD can extend drain
intervals far beyond those recommended for
conventional oils. Its unique synthetic
formulation and long drain additive system deliver
the best possible engine protection, cleanliness
and performance over extended drain intervals,
reducing vehicle maintenance and waste oil
disposal costs.
Maximizes Fuel
Economy AMSOIL Synthetic 5W-30 Heavy
Duty Diesel Oil is energy efficient for reduced
fuel costs. Its low viscosity minimizes “drag”
associated with high viscosity oils, allowing the
engine to operate more freely, maximizing power
and fuel economy.
Unsurpassed Protection
Against Engine Wear In the Four-Ball
Wear Test (ASTM D-4172B) AMSOIL HDD demonstrated
better anti-wear performance than competitive
petroleum and synthetic oils. Even under high
temperatures and pressures, its superior film
strength and anti-wear additives help prevent
metal-to-metal contact. AMSOIL HDD reduces ring
wear, cylinder bore polishing, oil consumption and
valve train wear for improved engine life and
lower maintenance costs.
Controls Soot Thickening
and Wear AMSOIL Synthetic 5W-30 Heavy
Duty Diesel Oil is heavily fortified with
detergent/dispersant additives and is naturally
resistant to soot. It keeps soot particles
suspended independently, preventing them from
attaching together to form larger, wear-causing
particles. Viscosity increase is minimized and
soot related wear is controlled.
Reduces Oil Consumption
and Emissions AMSOIL HDD loses only
6.7% of its mass to high temperature volatility
(evaporation) in the NOACK test, outperforming all
conventional oils. Because less oil vapor passes
into the combustion chamber, oil consumption and
emissions are reduced. Additionally, lower
volatility helps AMSOIL HDD retain its viscosity
after high temperature service for continued
dependable protection and excellent fuel
economy.
Excels in Extreme
Temperatures AMSOIL Synthetic 5W-30
Heavy Duty Diesel Oil resists thermal (heat)
breakdown, oxidation and sludge formation better
than conventional oils. And unlike conventional
petroleum oils, AMSOIL HDD contains no wax. It
stays fluid down to -60°F for improved cold
temperature oil flow, reduced bearing wear and
easier starting.
APPLICATIONS AMSOIL Synthetic 5W-30 Heavy Duty
Diesel Oil is recommended for diesel engines and
other applications requiring any of the listed
worldwide specifications and gasoline engines
requiring API SL, SJ, SH . . . or ACEA
A3.
• API CI-4+, CF, CF-2,
SL • ACEA A3/B3, E2, E3, E5 • Global DHD-1 • JASO
DH-1 • Mack EO-N Premium Plus ’03 • DDC Power
Guard 93K214 • Caterpillar ECF-1-a,
ECF-2 • Cummins CES 20071, 20072, 20076,
20077, 20078 • Volvo VDS-2, VDS-3 • MB 228.1,
228.3, 229.1 • MAN 3275 • MTU Type 1 •
MIL-PRF-2104G
AMSOIL HDD is
compatible with conventional and synthetic motor
oils. Mixing AMSOIL motor oils with other oils,
however, will shorten the oil life expectancy and
reduce the performance benefits. AMSOIL does not
support extended drain intervals where oils have
been mixed. Aftermarket oil additives are not recommended for use with
AMSOIL motor oils.
SERVICE
LIFE AMSOIL
Synthetic 5W-30 Heavy Duty Diesel Oil is
recommended for extended drain intervals in
unmodified(1), mechanically sound(2) vehicles or
equipment as follows:
Personal Light
Truck Diesel or Gasoline Engine
Service
• Normal
Service(3) – Up to 25,000 miles or one
year, whichever comes first, or longer based on
oil analysis.
• Severe
Service(4) – Up to 15,000 miles or one
year, whichever comes first, or longer based on
oil analysis.
• Replace AMSOIL Ea™
full flow oil filter at the time of oil change
up to 25,000 miles (other brands at standard
OEM* intervals).
Commercial or
Fleet Vehicles, Long-Haul Trucks, Marine Craft,
RV, Off-Road Equipment
• Non-EGR
equipped diesels – extend drain
intervals up to two times (2X) the OEM*
recommended drain interval or one year,
whichever comes first, or longer based on oil
analysis.
• Pre-2007
EGR equipped or low emission diesels –
extend drain intervals based on oil analysis or
use the OEM* recommended interval.
• Replace Donaldson
Endurance™ or AMSOIL Ea™ full flow oil filters
at the time of oil change up to two times (2X)
longer than the OEM* standard interval, not to
exceed 60,000 miles in long-haul
trucks.
*OEM = Original
Equipment Manufacturer
(1) Modifications and
Alterations – Engines operating under modified
conditions are excluded from extended drain
recommendations. Examples include the use of
performance computer chips; non-OEM approved
exhaust, fuel or air induction systems and the use
of fuels other than those recommended for normal
operation by the manufacturer.
(2) Mechanically sound
engines are in good working condition and do not,
for example, leak oil or consume excessive
amounts, are not worn out, do not overheat, do not
leak anti-freeze and have properly working
emission control systems. AMSOIL recommends
repairing malfunctioning engines prior to the
installation of AMSOIL synthetic oils.
(3) Personal vehicles
frequently traveling greater than 10 miles (16km)
at a time and not operating under severe
service.
(4) Gasoline Engine
Severe Service defined as turbo/supercharged
engines, commercial or fleet vehicles, excessive
engine idling, first and subsequent use of AMSOIL
engine oil in vehicles with over 100,000 miles,
daily short trip driving less than 10 miles (16
km), frequent towing, plowing, hauling or dusty
condition driving.
Diesel Engine Severe
Service defined as extensive engine idling, daily
short trip driving less than 10 miles (16 km),
frequent towing, plowing, hauling or dusty
condition driving.
AMSOIL Ea™ and
Donaldson Endurance™ full flow oil filters are
designed for extended drain intervals. They stop
smaller particles, have less restriction and last
longer than regular filters. For best performance,
use AMSOIL Ea™ or Donaldson Endurance™ oil
filters. Oil Analyzers Inc., 715-395-0222, is a
division of AMSOIL that provides cost effective,
quality oil analysis services.
Health & Safety This
product is not expected to cause health concerns
when used for the intended application and
according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available
upon request at 715-392-7101 or via the Internet
at http://www.amsoil.com/msds/index.aspx.
Keep Out of Reach of Children. Don’t pollute.
Return used oil to collection centers.
TYPICAL TECHNICAL
PROPERTIES - Revised
as of 8/07 |
AMSOIL Series 3000
Synthetic 5W-30 Heavy-Duty Diesel Oil
(HDD) |
Kinematic Viscosity @
100°C, cSt (ASTM D-445) |
11.4 |
Kinematic Viscosity @
40°C, cSt (ASTM D-445) |
64.6 |
Viscosity Index (ASTM
D-2270) |
174 |
Cold Crank Simulator
Apparent Viscosity @ -30°C, cP (ASTM D-5293)
|
5086 |
Pour Point °C (°F)
(ASTM D-97) |
-50
(-58) |
Flash Point °C (°F)
(ASTM D-92) |
228
(442) |
Noack Volatility
(DIN 51581) 250°C for 1 hour, % weight
loss |
6.9 |
High
Temperature/High Shear Viscosity, cP, 150°C, 1.0
x 106 s-1 (ASTM
D-4683) |
3.5 |
Four-Ball Wear Test
(ASTM D-4172: 40kgf, 150°C, 1800 rpm, 1 hr) Scar
diameter, mm |
0.38 |
Total Base
Number |
12.2 |
|