AMSOIL Engine and Transmission Flush (FLSH) helps
restore fuel economy, increase operating efficiency and
reduce emissions in gasoline and diesel engines, and
automatic transmissions. Its potent, detergent-based
formula cleans sludge and deposit build-up, promoting
lower operating temperatures and reduced oil consumption.
AMSOIL Engine and Transmission Flush
is safe on parts and can be easily disposed of with
waste oil.
Restores Vehicles to Like-New
New engines and transmissions run more efficiently, but
over time they gather harmful deposits that cause power
and performance loss. Stop-and-go driving, prolonged
idling, short trips that do not allow the engine to reach
full operating temperature, towing, the ingestion of airborne
dirt, fuel dilution, water condensation and
oxidized oil all can promote sludge build-up in motor oil
and transmission fluid. As it settles, sludge clogs narrow
oil passages, restricting oil flow to vital parts, especially
the upper valve train area.
In
transmissions, deposits can form on clutch plates, causing hesitation
and erratic shifting. Ultimately clutch glazing can set in, reducing
the life of the transmission. Deposits in engines and transmissions can
accelerate wear, causing power loss and increased fuel consumption.
• Cleans engines and transmissions for
improved efficiency, fuel economy and
lower emissions
• Prolongs equipment life
• Detergent-based formula more
environmentally friendly
• Compatible with seals and gaskets
• One-treatment results
• Easily disposed of with waste oil
Installing new oil or transmission fluid into a dirty
vehicle may not be enough to remove deposits and
increase efficiency. The detergents and dispersants in
some lubricants may not be able to handle leftover
sludge and deposits, and the new lubricant soon
becomes unfit for service, accelerating the formation of
even more harmful deposits.
AMSOIL Engine and Transmission
Flush Benefits
Unlike many flush products, AMSOIL Engine and Transmission Flush
features a multi-use formulation that dissolves and disperses sludge,
varnish and deposits in both engines and automatic transmissions. Due
to its detergent-based formulation, used AMSOIL FLSH can be easily
disposed of with waste oil, making it more user-friendly. Its advanced
formula of light base oil technology, powerful detergents and
dispersants provides safe cleaning action. AMSOIL FLSH is compatible
with both petroleum and synthetic oils, preparing poorly maintained
equipment for installation of new oil. It represents the first step
toward restoring neglected equipment to top-notch performance. AMSOIL
Engine and Transmission Flush provides the following benefits in only
one treatment:
Gasoline and Diesel Engines
• Helps loosen sticky valves and rings, minimizing
blow-by and reducing emissions
• Helps quiet lifter noise
• Promotes lower operating temperatures through
sludge removal
• Easy disposal
Automatic Transmissions
• Cleans deposits in oil cooler and ports
• Helps unclog fluid passages
• Cleans deposits and varnish from clutch plates,
helping improve efficiency
• Promotes smoother operation and transmission
life through reduced shift delay
Applications
AMSOIL Engine and Transmission Flush is recommended for
diesel and gasoline engines, and automatic transmissions. It
is not recommended for CVT transmissions or differentials.
Directions for Use
Though it works in one treatment, AMSOIL Engine and
Transmission Flush is safe enough to be used at every
oil change. If using a flushing machine, follow the
manufacturer’s recommendation. Otherwise, use the
following guidelines:
Engine: Add 16 oz. bottle of AMSOIL Engine and
Transmission Flush to engine oil fill port. Idle the engine
for 10-15 minutes, then immediately drain the oil.
Ensure enough time for the system to completely
drain. Remove and replace the engine oil filter. Refill
engine with new engine oil in the viscosity grade recommended
by the manufacturer.
Transmission: Engage emergency brake. Add 16 oz. bottle
of AMSOIL Engine and Transmission Flush to transmission
oil fill port. Idle for 10-15 minutes; shift through drive and
reverse. Do NOT place vehicle under heavy load. Drain entire
transmission and torque converter of fluid. FILTER MUST BE
CHANGED prior to refilling with new transmission fluid.
NOTE: It is not recommended to flush transmissions that do not have a
removable pan or access to the transmission filter.
|
(above) Automatic transmission clutch plates pre-cleanup.
Varnish and glazing is heavy on some of the plates. |
|
(above) Automatic transmission clutch plates after cleanup
with AMSOIL Engine and Transmission Flush
reveal lighter glazing and varnish. |
|
(above) Cylinder head pre-cleanup. Note the sludge deposits on and
around the valve springs and push rod openings. |
|
(above) Cylinder head after cleanup with AMSOIL Engine and
Transmission Flush. The valve springs and push rod
openings are noticeably cleaner, with fewer sludge deposits.
The manufacturer’s stamping is more easily seen. |
|